Request Repair
Your Global Provider of High Speed Precision Spindle Motors, Support and Repair
704-922-1206  | 

Rebuilt Spindles

All rebuilt spindles undergo our detailed, six step repair process, tested and are warrantied six months from purchase date.

Giordano Colombo – RV 154 – Rebuilt

Rebuilt 12 HP RV 154/22 40 FB3 ISO 30 CR PDE, Electric Spindle, 230/460 V, 18000 RPM, 300 Hz, 2 Pole, Dwg #30189 Details: Cooling by external fan 350 cfm (not included) Duty cycle 60% Automatic tool change controlled by 3 sensors and double acting pneumatic actuator Tool clamping by fingers for ISO 30 tapers […]

Read More



PDS – XLA/C 70 – Rebuilt

Rebuilt XLA/C 70-3HP HSK-E 25, Electric Spindle 230V, 6.8A, 24,000/40,000 RPM, 400/667 Hz, 2-Pole, 22/30brg  Details: Cooling by compressed Air or Liquid Liquid 0.6 gpm @ 30psi Air 4 Bar (60psi) at 2.1 scfm Harting quick disconnect Air and Electrical connections Air pressurization seal of front bearings Quiet operation: Max 72 dBA at top speed […]

Read More



PDS – ADES90 – Rebuilt

Rebuilt 7.5hp, ADES90, ER25, Electric Spindle, 230/380V, 19.3/11.2A , 24000 RPM, 400 Hz, 2 Pole Details: Cooling by Electric Fan 24Vdc (1.1 amp) Tool clamp for ER25 collets – Max 5/8″ dia. cutter shank Dual Angular contact super precision bearings at tool end Weight 32 lbs Use Shaft Wrench 27, Collet Wrench 25E (Sold Separately) […]

Read More



PDS – XLA/C 70 – Rebuilt

Rebuilt XLA/C 70-3HP HSK-E 25, Electric Spindle 230V, 6.8A, 24,000/40,000 RPM, 400/667 Hz, 2-Pole, 22/30brg  Details: Added Options: Pushbutton tool release and black anodized nose cap and t-box. Cooling by compressed Air or Liquid Liquid 0.6 gpm @ 30psi Air 4 Bar (60psi) at 2.1 scfm Harting quick disconnect Air and Electrical connections Air pressurization […]

Read More



PDS – XLA/C 70 – Rebuilt

Rebuilt XLA/C 70-3HP HSK-E 25, GERBER SPEC Electric Spindle 230V, 6.8A, 24,000/40,000 RPM, 400/667 Hz, 2-Pole, 22/30brg DETAILS: Wire Harness configured per Gerber Drwg. P73473D Rev C Cooling by compressed Air or Liquid Liquid 0.6 gpm @ 30psi Air 4 Bar (60psi) at 2.1 scfm Harting quick disconnect Air and Electrical connections Air pressurization seal […]

Read More



PDS – ADEV90 – REBUILT

Rebuilt 4.4/5.3HP, ADEV90, ER25, Electric Spindle, 220/380V, 18000 RPM, 300HZ, 2 Pole DETAILS: Cooling by shaft driven fan Tool clamp by collet ER 25 for 5/8″ diameter max tool shank Weight 29 lb Dual angular contact super precision bearings at tool end Use Shaft Wrench 27, Collet Wrench 25E (Sold Separately) Use Collet Nut 25ER […]

Read More



Giordano Colombo – RV 154/22 – Rebuilt

Rebuilt 16 HP, RV 154/22 50 FB3 ISO 30 CR PDE, 230/460 V, 18000 RPM, 300 Hz, 2 Pole DETAILS: Cooling by external fan 350 cfm (not included) Duty cycle 60% Automatic tool change controlled by 3 sensors and pneumatic actuator Tool clamping by ISO 30/ER 32 tool holder for 3/4″ diameter max tool shank […]

Read More



Giordano Colombo – RV 90/2 – Rebuilt

Rebuilt 7.5 HP, RV 90/2 FP1 SB CPE 25 DX, Electric Spindle, 220/380 V, 21.6/12.5 A, 18000/24000 RPM, 300/400 Hz, 2 Pole DETAILS: Cooling by shaft driven fan Weight 29 lb Tool clamp by collet ER 25 for 5/8″ diameter max tool shank Includes UMER 25 (M32x1.5) collet nut Dual angular contact super precision bearings […]

Read More



Giordano Colombo – RS 90/2 – Rebuilt

Rebuilt 5 HP, RS 90/2 FP1 SB CPE 25 DX, Electric Spindle, 220/440 V, 15/7.6 A, 18000/24000 RPM, 300/400 Hz, 2 Pole DETAILS: Cooling by electric fan 45 cfm (included) Quiet operation: Max 74 dBA at top speed Duty cycle 60% Weight 30 lb Tool clamp by collet ER 25 for 5/8″ diameter max tool […]

Read More



Giordano Colombo – RV 110/22 – Rebuilt

Rebuilt 10 HP, RV 110/22 40 FP1 SB CPE 32 DX, 230/460 V, 27.5/13.8 A, 18000/24000 RPM, 300/400 Hz, 2 Pole DETAILS:  Cooling by shaft driven fan Tool clamp by collet ER 32 for 3/4″ diameter max tool shank Duty cycle 60% Weight 40 lbs Dual angular contact super precision bearings front and rear. Item […]

Read More



Giordano Colombo – RA/RC 90/22 – Rebuilt

Rebuilt 5.5 HP, RA/RC 90/22 35 FP1 ISO 25 CR PDE SF SL, Electric Spindle, 220/380 V, 16/9.4 A, 24000/32000 RPM, 400/533 Hz, 2 Pole DETAILS: Extended spindle nose Cooling by liquid or compressed air Air pressure seal of front bearings Quiet operation: Max 72 dBA at top speed Automatic tool change controlled by pneumatic […]

Read More



Giordano Colombo – RA 90/22 – Rebuilt

Rebuilt 5.5 HP, RA 90/22 35 FP1 CPE 25 DX, Electric Spindle, 460 V, 7.6 A, 18000/24000, 300/400 Hz, 2 Pole DETAILS: Cooling by liquid, 0.7 gpm at 35 psi Air pressurization of bearing Heavy duty, 100% duty cycle rating Tool clamp by collet ER 25 Dual angular contact, super precision bearings at each end […]

Read More



Giordano Colombo – RV 154/22 – Rebuilt

Rebuilt 12 HP, RV 154/22 50 FB3 CPE 40 DX, Electric Spindle, 230/460 V, 36/18 A, 18000 RPM, 300 Hz, 2 Pole DETAILS: Cooling by shaft driven fan Pushbutton to lock the spindle shaft during tool change Tool clamping by collet ER 40 for 1″ diameter max tool shank Collet nut included Weight: 86 lbs […]

Read More



PDS – DLS 90 – Rebuilt

Rebuilt – DLS 90-7.5-24-D Ceramic, 7.5 HP, Dyna-Loc HSK clamping, C/C, Electric Spindle, 220/380 V, 18/11 A, 18000/24000 RPM, 300/400 Hz, 2 Pole DETAILS: Cooling by electric fan (included) Air pressure seal of front bearings Automatic tool change controlled by Dyna-Loc clamping system Tool clamping for HSK40F tool holders Single point power, signal and air […]

Read More



Hiteco – QE-1F 8/12 – Rebuilt

Rebuilt QE-1F 8/12 24 I30 NC CB 11HP (8KW, S1) 12.8 HP (9.5 kW S6) XLHS 110, ISO30, SN, Electric Spindle, 380 V, 18A, 12000/24000 RPM, 400/800 Hz, 4 Pole DETAILS: Manual Push Button for tool release and setup Cooling by electric fan 24VDC 3.90A Air pressurization of front bearings Tool Clamping by ISO30 balls […]

Read More



Hiteco – QE-1F 8/12 – Rebuilt

Rebuilt QE-1F 8/12 24 63F NC CB BT 11HP (8KW),12.8HP (9.5kW S6) XLHS110, HSK-F-63, SN CB BT, Electric Spindle,220/380 V, 27/15 A, 12000/24000 RPM, 400/800 Hz, 4 Pole DETAILS: Manual Push Button for tool release and setup Cooling by electric fan 24VDC 3.90A Air pressurization of front bearings Tool Clamping by HSK-F-63 taper Automatic tool change […]

Read More



Hiteco – QE-1F 10/11 – Rebuilt

Rebuilt QE-1F 10/11 24 63F NC CB DV 16HP (12kW S6) 13.4HP (10KW S1), HS110, HSK-F-63, SN, Electric Spindle, 380 V, 22A, 11000/24000 RPM, 400/800 Hz, 4 Pole DETAILS: Manual Push Button for tool release and setup Cooling by electric fan 24VDC 3.90A Air pressurization of front bearings Tool Clamping by HSK-F-63 taper ATC controlled […]

Read More



Giordano Colombo – RS 90/2 – Rebuilt

Rebuilt 7.5 HP, RS 90/2 FP1 SB CPE 25 DX, Electric Spindle, 220/380 V, 21.5/12.5 A, 18000 RPM, 300 Hz, 2 Pole DETAILS: Cooling by electric fan 45 cfm (included) Quiet operation: Max 74 dBA at top speed Tool clamp by collet ER 25 for 5/8″ diameter max tool shank Weight 31 lb Includes UMER […]

Read More



Giordano Colombo – RA 110/22 – Rebuilt

Rebuit R10 HP, RA 110/22 35 FP1 HSK-F 50 CR PDE, Electric Spindle, 460 V, 14.7 A, 18000/24000 RPM, 300/400 Hz, 2 Pole DETAILS: Cooling by liquid 3 Lit/Min Air pressure seal of front bearings Duty cycle 100% Automatic tool change controlled by double acting pneumatic actuator and 3 sensors Tool clamping for HSK-50-F tapers […]

Read More



Giordano Colombo – RV 154/22 – Rebuilt

Rebuilt 16 HP, RV 154/22 50 FB3 ISO 30 CR PDE, Refurbished Electric Spindle, 480 V, 22 A, 9000/18000 RPM, 300/600 Hz, 4 Pole DETAILS:  Cooling by external fan 350 cfm (not included) Duty cycle 60% Automatic tool change controlled by 3 sensors and pneumatic actuator Tool clamping by fingers for ISO 30 tapers Shaft […]

Read More



Omlat Electric Spindle Type # 7.5 – Rebuilt

Rebuilt  Omlat Electric Spindle type #7.5/11KW/ 12-18-24K; 380V, 4P, 400/600/800HZ Warranty: 6 months from purchase *Price: $8,000.00 *All prices are NET – no discounting on rebuilt spindles

Read More



Question About Products?

Our trained spindle experts are standing by to help you choose the products that best fit your needs.

Contact Us Today!

© 2017 Precision Drive Systems. Site designed by: Industrial Marketing Experts